Dear readers, Lok Sabha Elections are going to be held from 7 April
onwards and EVMs are used for voting in elections. So here we are
presenting you an article on EVM which will make you aware about it.
Electronic Voting machine: An Electronic Voting Machine
consists of two Units – a Control Unit and a Balloting Unit – joined by a
five-meter cable.
The Control Unit is with the Presiding Officer or a Polling
Officer and the Balloting Unit is placed inside the voting compartment. Instead
of issuing a ballot paper, the Polling Officer in-charge of the Control Unit
will press the Ballot Button.
This will enable the voter to cast his vote by pressing the
blue button on the Balloting Unit against the candidate and symbol of his
choice. The Control Unit can store the result in its memory for 10 years and
even more.
EVMs manufactured in 1989-90 were used on experimental basis
for the first time in 16 Assembly Constituencies in the States of Madhya
Pradesh (5), Rajasthan (5) and NCT of Delhi (6) at the General Elections to the
respective Legislative Assemblies held in November, 1998.
EVMs run on an ordinary 6 volt alkaline battery manufactured
by Bharat Electronics Ltd., Bangalore and Electronic Corporation of India Ltd.,
Hyderabad. Therefore, even in areas with no power connections, EVMs can be
used.
EVMs can record a maximum of 3840 votes. As normally the
total number of electors in a polling station will not exceed 1500, the
capacity of EVMs is more than sufficient.
What is the maximum number of candidates which EVMs can
provide:
EVMs can cater to a maximum of 64 candidates. There is
provision for 16 candidates in a Balloting Unit. If the total number of candidates exceeds 16, a second
Balloting Unit can be linked parallel to the first Balloting Unit.
Similarly, if the total number of candidates exceeds 32, a
third Balloting Unit can be attached and if the total number of candidates
exceeds 48, a fourth Balloting Unit can be attached to cater to a maximum of 64
candidates.
What will happen if the number of contesting candidates in a
constituency goes beyond 64?
In case the number of contesting candidates goes beyond 64
in any constituency, EVMs cannot be used in such a constituency. The
conventional method of voting by means of ballot box and ballot paper will have
to be adopted in such a constituency.
What will happen if the EVM in a particular polling station
goes out of order:
An Officer is put on
duty to cover about 10 polling stations on the day of poll. He will be carrying spare EVMs and the out-of-order EVM can
be replaced with a new one.
The votes recorded until the stage when the EVM
went out of order will be safe in the memory of the Control Unit and it will be
sufficient to proceed with the polling after the EVM went out of order. It is
not necessary to start the poll from the beginning.
Simple compared to the conventional system:
In fact, voting by EVMs is simpler compared to the
conventional system, where one has to put the voting mark on or near the symbol
of the candidate of his choice, fold it first vertically and then horizontally
and thereafter put it into the ballot box.
In EVMs, the voter has to simply press the blue button
against the candidate and symbol of his choice and the vote is recorded. Rural
and illiterate people had no difficulty in recording their votes and, in fact
they have welcomed the use of EVMs.
Advantages in using EVMs:
The most important advantage is
that the printing of millions of ballot papers can be dispensed with, as only
one ballot paper is required for fixing on the Balloting Unit at each polling
station instead of one ballot paper for each individual elector. This results
in huge savings by way of cost of paper, printing, transportation, storage and
distribution.
Secondly, counting is very quick and the result can be
declared within 2 to 3 hours as compared to 30-40 hours, on an average, under
the conventional system.
Thirdly, there are no invalid votes under the system of
voting under EVMs. The importance of this will be better appreciated, if it is
remembered that in every General Election, the number of invalid votes is more than
the winning margin between the winning candidate and the second candidate, in a
number of constituencies. To this extent, the choice of the electorate will be
more correctly reflected when EVMs are used.
Is it possible to vote more than once by pressing the button
again and again?
As soon as a particular button on the Balloting Unit is
pressed, the vote is recorded for that particular candidate and the machine
gets locked. Even if one presses that button further or any other button, no
further vote will be recorded. This way the EVMs ensure the principle of
"one man, one vote".
How can a voter be sure that the EVM is working and his vote
has been recorded?
As soon as the voter presses the `blue button’ against the
candidate and symbol of his choice, a tiny lamp on the left side of the symbol
glows red and simultaneously a long beep sound is heard. Thus, there is both
audio and visual indications for the voter to be assured that his vote has been
recorded.
Is it true that sometimes because of short-circuitry or
other reason, a voter is likely to get an electric shock while pressing the
`blue button ?
EVMs work on a 6-volt battery and there is absolutely no
chance of any voter getting an electric shock at the time of pressing the `blue
button’ or at any time of handling the balloting unit.
How can the
total number of votes polled be known on the date of poll?
In addition to the ‘Result’ button, there is a ‘total’
button on EVMs. By pressing this button the total number of votes polled upto
the time of pressing the button will be displayed without indicating the
candidate-wise tally.
The Balloting Unit has provision for 16 candidates. In a
constituency, there are only 10 candidates. The voter may press any of the
buttons from 11 to 16. Will these votes not be wasted?
The panels for candidates Nos. 11 to 16 will be masked
before use. Further, recording of votes for candidates 11 to 16 will also be
blanked off electronically, as the candidates’ switch is set on 10. Therefore,
there is no question of any voter pressing any of the buttons for candidates 11
to 16 or the votes for these candidates being recorded in the EVMs.
How can one rule out the possibility of recording further
votes at any time after close of the poll and before the commencement of
counting by interested parties?
As soon as the last voter has voted, the Polling Officer
in-charge of the Control Unit will press the ‘Close’ Button. Thereafter, the
EVM will not accept any vote. Further, after the close of poll, the Balloting
Unit is disconnected from the Control Unit and kept separately.
Votes can be
recorded only through the Balloting Unit. Again the Presiding officer, at the
close of the poll, will hand over to each polling agent present an account of
votes recorded.
At the time of counting of votes, the total will be tallied
with this account and if there is any discrepancy, this will be pointed out by
the Counting Agents.
